Intended Use; Preparation; Installation - Goobay 71362 Mode D'emploi

Detection area
Detection angle
Switch-off delay
Brightness sensitivity
Ceiling mounting height
Motion detection
Protection level
Environment conditions
Dimensions
Borehole diameter
Weight
Switch
Minimum load
3

Intended Use

We do not permit using the device in other ways like described in
IP20
chapter "Description and Function" and „Safety Instructions". This
product is protected against medium sized foreign objects, but not against
water ingress. Not attending to these regulations and safety instructions
might cause fatal accidents, injuries, and damages to persons and property.
4

Preparation

Compare the specifications of all used devices to ensure compatibility.
•
Check the scope of delivery for completeness and integrity.
•
5

Installation

Let open cable ends ONLY assemble by experienced
•
electrician.
Cut off power supply before any work on the product,
•
switch off safety fuse and secure against reconnection.
• Assure and check the absence of voltage before any
work on the product.
360° wall/ceiling installation
<3-2000 lx / day and night (
1 W (incandescent and LED/Energy saving lamps)
Risk of electric shock
8 m (<24 °C)
10±3 s ~ 15±2 Min.
2.2-4 m
0.6-1.5 m/s
IP20
-20 ~ +40 °C, 93 % RH
61.4 x Ø80 mm
Ø68-70 mm
94 g
Relais
)
Tab. 3: Specifications
14