Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
• This tool is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible for
their safety. Children should be
supervised to ensure that they do not
play with the appliance.
• The intended use is described in this
instruction manual. The use of any
accessory or attachment or performance
of any operation with this tool other than
those recommended in this instruction
manual may present a risk of personal
injury and/or damage to property.
Safety of others
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible for
their safety.
• Children should be supervised to ensure
that they do not play with the appliance.
Residual risks.
Additional residual risks may arise when
using the tool which may not be included
in the enclosed safety warnings. These risks
can arise from misuse, prolonged use etc.
Even with the application of the relevant
safety regulations and the implementation
of safety devices, certain residual risks can
not be avoided. These include:
• Injuries caused by touching any
rotating/moving parts.
• Injuries caused when changing any
parts, blades or accessories.
• Injuries caused by prolonged use of a
tool. When using any tool for prolonged
periods ensure you take regular breaks.
• Impairment of hearing.
• Health hazards caused by breathing dust
developed when using your tool
(exam ple:- working with wood,
especially oak, beech and MDF.)
All manuals and user guides at all-guides.com
(Original instructions)
Vibration
The declared vibration emission values stat-
ed in the technical data and the declaration
of conformity have been measured in accor-
dance with a standard test method provided
by EN 60745 and may be used for com-
paring one tool with another. The declared
vibration emission value may also be used in
a preliminary assessment of exposure.
Warning! The vibration emission value
during actual use of the power tool can
differ from the declared value depending
on the ways in which the tool is used. The
vibration level may increase above the level
stated.
When assessing vibration exposure to deter-
mine safety measures required by 2002/44/
EC to protect persons regularly using power
tools in employment, an estimation of vibra-
tion exposure should consider, the actual
conditions of use and the way the tool is
used, including taking account of all parts of
the operating cycle such as the times when
the tool is switched off and when it is run-
ning idle in addition to the trigger time.
Labels on tool
The following pictograms are shown on the
tool:
Warning! To reduce the risk of
injury, the user must read the
instruction manual.
Electrical safety
This tool is double insulated;
therefore no earth wire is required.
Always check that the power supply
corresponds to the voltage on the
rating plate.
• If the supply cord is damaged, it must be
replaced by the manufacturer or an
authorised Black + Decker Service Centre
in order to avoid a hazard.
Using an extension cable
• Always use an approved extension
cable suitable for the power input of this
tool (see technical data). Before use,
inspect the extension cable for signs of
ENGLISH
7
Publicité
Table des Matières
