Accessories; Technical Data - Black & Decker KA330E Instructions D'origine

Switching on and off (fig. G)
• To switch the tool on, press the front
part I of the on/off switch (1).
• To switch the tool off, press the rear part
O of the on/off switch.
Hints for optimum use (fig. H)
• Always hold the tool with both hands.
• Do not exert too much pressure on the
tool.
• Regularly check the condition of the
sanding sheet. Replace when necessary.
• Always sand with the grain of the wood.
• When sanding new layers of paint before
applying another layer, use extra fine grit.
• On very uneven surfaces, or when
removing layers of paint, start with
coarse grit. On other surfaces, start with
a medium grit. In both cases, gradually
change to a fine grit for a smooth finish.
• Consult your retailer for more information
on available accessories.

Accessories

The performance of your tool depends on
the accessory used. BLACK+DECKER and
Piranha accessories are engineered to high
quality standards and designed to enhance
the performance of your tool. By using
these accessories you will get the very best
from your tool.
Replacement packs of pre-punched sand
paper are available through you local
BLACK+DECKER dealer.
For 80G - 5 sheet packs use part number
X31517-XJ
For 120G - 5 sheet packs use part number
X31522-XJ
For 240G - 5 sheet packs use part number
X31527-XJ
Maintenance
Your tool has been designed to operate over
a long period of time with a minimum of
maintenance. Continuous satisfactory
operation depends upon proper tool care
and regular cleaning.
Warning! Before performing any mainte-
nance, switch off and unplug the tool.
• Regularly clean the ventilation slots in
your tool using a soft brush or dry cloth.
• Regularly clean the motor housing using a
damp cloth. Do not use any abrasive or
solvent-based cleaner.
All manuals and user guides at all-guides.com
(Original instructions)
EC declaration of conformity
MACHINERY DIRECTIVE
BLACK+DECKER declares that these prod-
ucts described under "technical data" are in
compliance with: 2006/42/EC, EN 60745-1,
EN 60745-2-4
These products also comply with Directive
2014/30/EU and 2011/65/EU. For more in-
formation, please contact BLACK+DECKER
at the following address or refer to the back
of the manual.
The undersigned is responsible for compi-
lation of the technical file and makes this
declaration on behalf of BLACK+DECKER.

Technical data

Input Voltage
Power input
No-load speed
Orbits (no load)
Sanding base surface
Weight
Level of sound pressure according to EN 60745:
Sound pressure (L
pA
Sound power (L ) 94.5 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum)
according to EN 60745:
Vibration emission value (a
uncertainty (K) 1.5 m/s
ENGLISH
KA330E
KA330E (Type 1)
V 230
AC
W 270
min- 10,000 26,000
1
min- 5,000
1
mm 90x187
kg 1.8
) 83.5 dB(A), uncertainty (K) 3 dB(A)
) 7.2 m/s ,
2
h
2
13,000
9