Black & Decker KA330E Instructions D'origine page 6

ENGLISH
f. Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from moving
parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
g. If devices are provided for the
connection of dust extraction and
collection facilities, ensure these are
connected and properly used. Use of
dust collection can reduce dust-related
hazards.
4. Power tool use and care
a. Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job
better and safer at the rate for which it
was designed.
b. Do not use the power tool if the switch
does not turn it on and off. Any power
tool that cannot be controlled with the
switch is dangerous and must be repaired.
c. Disconnect the plug from the power
source and/or the battery pack from the
power tool before making any
adjustments, changing accessories, or
storing power tools. Such preventive
safety measures reduce the risk of
starting the power tool accidentally.
d. Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands
of untrained users.
e. Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the power
tools operation. If damaged, have the
power tool repaired before use. Many
accidents are caused by poorly
maintained power tools.
f. Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
g. Use the power tool, accessories and tool
6
All manuals and user guides at all-guides.com
(Original instructions)
bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
5. Service
a. Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
Additional power tool safety
warnings
Warning! Additional safety
warnings for sanders
• Hold power tool by insulated gripping
surfaces when performing an operation
where the cutting accessory ma
contact hidden wiring. Cutting accessory
contacting a "live" wire may make
exposed metal parts of the power tool
"live" and could give the operator an
electric shock
• Use clamps or another practical way to
secure and support the workpiece to
a stable platform. Holding the work by
hand or against your body leaves it
unstable and may lead to loss of control.
Warning! Contact with or inhalation
of dusts arising from sanding
applications may endanger the
health of the operator and possible bystand-
ers. Wear a dust mask specifically designed
for protection against dust and fumes and
ensure that persons within or entering the
work area are also protected.
• Thoroughly remove all dust after sanding.
• Take special care when sanding paint
which is possibly lead based or when
sanding some woods and metal which
may produce toxic dust:
• Do not let children or pregnant women
enter the work area.
• Do not eat, drink or smoke in the work
area.
• Dispose of dust particles and any other
debris safely.