Speedaire 2 Gallon Oilless Air Compressor - Speedaire 25F538 Manuel D'instructions

Operating Instuctions & Parts Manual
Speedaire 2 GALLON
Oilless Air Compressor
(continued)
E
3. Avoid accidental starting.
N
Be sure the Power Switch is in
G
its "STOP" position, all pres-
L
sure is safely released, and the
I
unit is unplugged before
S
moving the Compressor and
H before performing any service,
maintenance, or cleaning
procedures on the unit.
4. Remove adjusting keys or
wrenches before turning the
Compressor on. A wrench or a
key that is left attached to a
rotating part of the machine
may result in personal injury.
5. Do not overreach. Keep
proper footing and balance at
all times. Proper footing and
balance enables better control
of the air tool in unexpected
situations.
6. Use safety equip-
ment. Always wear ANSI-
approved safety impact
glasses, dust mask/respirator
and hearing protection during
use.
TOOL USE AND CARE
1. Do not force the tool. Use
the correct tool for your
application. The correct tool
will do the job better and
safer at the rate for which it is
designed.
2. Do not use the Compressor
if the Compressor's Power
Switch does not turn it on or
off. Any tool that cannot be
controlled with its Pressure
Switch is dangerous and must
not be used until repaired.
®
3. Store idle tools out of
reach of children and other
untrained persons. Tools are
dangerous in the hands of
untrained users.
4. Maintain tools with care.
Properly maintained tools
are less likely to bind and
are easier to control. Do not
use a damaged tool. Tag
damaged tools "Do not use"
until repaired.
5. Check for misalignment or
binding of moving parts,
breakage of parts, and any
other condition that may
affect the tool's operation.
If damaged, have the tool
serviced before using. Many
accidents are caused by
poorly maintained tools.
6. Use only accessories that
are recommended by the
manufacturer for your
model. Accessories that may
be suitable for one tool may
become hazardous when
used on another tool.
SERVICE
1. Tool service must be
performed only by qualified
repair personnel. Service or
maintenance performed by
unqualified personnel could
result in a risk of injury.
2. When servicing a tool, use
only identical replacement
parts. Follow instructions in
the "Inspection, Mainte-
nance, And Cleaning"
section of this manual. Use
of unauthorized parts or
2
25F538
failure to follow mainte-
nance instructions may
create a risk of electric shock
or injury.
SPECIFIC SAFETY
RULES AND
PRECAUTIONS
Your Warranty is
voided if: You dropthe Air
Compressor. Always lift the
Air Compressor using its
Handle.
Do not expose to a high-dust
environment. Dusty condi-
tions may increase wear on
the Compressor.
This Air Com-
pressor is NOT equipped and
should not be used "as-is" to
supply breathing air. For
any application of air for
human consumption, you
must fit the Air Compressor
with suitable in-line safety
and alarm equipment (not
included). This additional
equipment is necessary to
properly filter and purify the
air to meet minimal
specifications for Grade D
breathing as described in
Compressed Gas Association
Commodity Specification G
7.1-1966, OSHA 29 CFR 1910.
134, and/or Canadian Stan-
dards Associations (CSA). In
the event the Air Compres-
sor is used for the purpose
of breathing air application
and proper in-line safety and
alarm equipment is not
simultaneously used, existing
warranties are void, and
Grainger disclaims any