Technical Characteristics; Warranty; Spare Parts - Sima AMBAR 200 Manuel D'utilisation Original

blade deteriorated or worn-out
Defective cutting
Vibrations
occurrence

13. TECHNICAL CHARACTERISTICS

Exterior blade diameter (mm.)
Interior blade diameter (mm.)
Cutting length (mm.)
Cutting depth (mm.)
Motor power
Motor tension
motor R.P.M.
Water pump power
Water pump tension
Motor and pump frequency
Net weight (Kg.)
Dimensions (mm.)
Water tank capacity (L.)

14. WARRANTY

SIMA, S.A. the manufacturer of light machinery for construction possesses a net of technical services "SERVI-
SIMA".
Repairs under warranty made by SERVÍ-SIMA are subject to some strict condition to guaranty a high quality
and service.
SIMA S. A. guarantees all its products against any manufacturing defect; to take into account the conditions
stated in the attached document "WARRANTY CONDITIONS". The latter would cease in case of failure to comply with
the established payment terms. SIMA S.A. reserves its right to bring modifications and changes to its products without
prior notice.

15. SPARE PARTS

The spare parts for the cutting table, model AMBAR 200, manufactured by SIMA, S.A. are to be found in the
spare parts plan, attached to this manual.
To order any spare part, please contact our alter-sales service clearly indicating the serial number of the
machine, model, manufacturing number and year of manufacturing that show on the characteristics plate.
The machine is not aligned
Inappropriate blade
blade oscillation
blade subjection defect
Wrap the blade
DESCRIPTION
Long
Wide
High
Align
Change blade
Use appropriate blade for material
Check the state of the disc and mount it
correctly
Make sure the bridles and the motor axis
are well adjusted. Tighten well the nut.
Change the blade
AMBAR 200
200
22,2
600
35
0,80Kw
230V~
2980
10 w
230V~
50Hz
32
900
450
950
24
-12-
ENGLISH