Safety Recommendations; Solutions To Most Frequent Anomalies; Technical Characteristics - Sima C-6/22 Manuel D'utilisation

6. SAFETY RECOMMENDATIONS

• Before using the manual shear, read carefully the instructions manual and make sure to comply with the
safety norms.
• The manual shears are only to be operated by authorized people that have been trained on their functioning.
• Use always the adequate Individual Protection Equipment (IPE) for each job.
• Make sure the manual shear in a perfect technical state and working order.
• Do not operate the manual shear if it is not firmly fixed to a safe surface.
• Check there is nobody in the machine working ratio
• When you need to move the machine, do it in a safe manner with the necessary means in function of its
weight.
• Control the joints, bolts, nuts, wildings, corrosion, fissures etc.
• Never use the shear for what it has not been designed for.
WARNING: You are to follow all safety recommendations mentioned in the present user manual and comply
with all labour risks prevention norms in every location.
SIMA, S.A. is not responsible for the consequences possibly generated but the inadequate use of the manual shear.

7. SOLUTIONS TO MOST FREQUENT ANOMALIES

ANOMALY
Does not cut
Premature wear of the bolts

8. TECHNICAL CHARACTERISTICS

DETAILS
NET WEIGHT Kg.
DIMENSIONS L x A x H mm.
MAXIMAL CUTTING Ø mm
POSSIBL CAUSE
Blades blunt
Excessive resistance to cutting
Fault of maintenance
C6/22.
19
300x120x250
22 flat
6
SOLUTION
Turn the blade for a new set of
cuttings and replace it if necessary
Correct anew the distance between
the blades
Periodically grease the bolts
C6/28. C6/32.
40 49
470x150x350 470x160x360
28 flat 32 flat
ENGLISH