Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V 3.03
PARTS IDENTIFICATION
PARTS LIST
No.
Name
1
Fuel Tank
2
Priming Plug
3
Discharge Outlet
4
Choke Lever
5
Air Cleaner
6
Recoil Starter
7
Engine Speed Lever
8
On / Off Switch
9
Oil Drain
10
Oil Fill
11
Suction Inlet
12
Water Drain Plug
13
Pump Chamber
14
Fuel Shutoff Valve
15
Fire Kit
18
All manuals and user guides at all-guides.com
2 in. High Pressure Transfer Pump
Description
Fill tank with regular unleaded fuel. Always leave room for fuel expansion.
Fill the pump with water here to prime the pump before starting.
Connect the discharge hose here.
Prepares a cold engine for starting.
Protects the engine by filtering dust and debris out of the air intake.
Used for staring the engine manually.
Used to adjust the engine speed to control the pump output.
Set this switch to the "On" position before using the recoil starter. Set the
switch to the "Off" position to stop a running engine.
Drain the engine oil here.
Check and add engine oil here.
Connect the reinforced suction hose here.
Remove to drain water from the pump and flush the internal components
with clean water.
Be sure to fill with water before starting.
Used to turn the fuel supply to the engine on and off.
Nozzle & Hose
8408890
For technical questions call 1-800-665-8685
Publicité
Table des Matières
