V 3.03
STOPPING THE WATER PUMP
1. Move the engine speed lever to the "Slow" position.
2. Push the on / off switch to the "Off" position.
3. Turn the fuel valve to the "Off" position.
CAUTION! Do not stop the engine by moving the choke control to the "Choke" position. Backfire, fire or engine
damage could occur.
DRAIN AND FLUSH THE WATER PUMP
1. Disconnect and drain the suction and discharge hoses.
2. Remove the drain plug at the bottom of the pump.
3. Remove the primer plug from the top of the pump and flush the internal components of the pump with
clean water.
Fig. 13
4. Replace both plugs and finger tighten.
12
All manuals and user guides at all-guides.com
2 in. High Pressure Transfer Pump
Fig. 12
8408890
For technical questions call 1-800-665-8685