Bosch 1119 Mode D'emploi page 9

Using the Remote Control
Apart
i
temperature that can be
memorized using the
"Program" button on the
control panel, a second
temperature
memorized
remote control using the
"Program"
meet the needs of each
user.
If the temperature was memorized
using remote control buttons (it is
possible to combine up to six remote
controls), it can only be modified whilst
hot water is flowing if the same remote
control is used again (see chapter 4.6
"Priority Function").
Using the
(operation
temperature)
To operate the equipment with a
previously memorized temperature:
B Press the "Program" button on the
remote control.
The remote control display or control
panel will now show the previously
memorized temperature. When the hot
water tap is turned on, the boiler will
8
from
can
on each
button,
"Program" button
with memorized
supply hot water after a few seconds,
the
at the memorized temperature.
4.6
i
be
to
The equipment does not have a default
temperature setting and therefore has
no default
"priority"
automatically by the first user who
selects or memorises (on the remote
control or on the control panel) a
temperature for subsequent use (e.g. a
shower).
Then, when the hot water is used (e.g.
for a shower), the control panel display
and remote control/s display will show
the symbol "
The temperature may only be modified
"Priority" function
Temperature cannot be
memorized or selected
using the control panel
buttons or
second remote control
when hot water is in use
(e.g. during a shower)
since the
function
automatically start up to
stop another
modifying
temperature when hot
water is in use.
"Priority"
will be
".
even a
"Priority"
will
user
the
function.The
attributed
6 720 607 740