Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
B The required temperature will flash
on the remote control display.
B The flashing will stop when the
required temperature is reached
(tolerance ± 3 °C).
Fig. 8
Temperature adjustment
4.5
"Program" Button on the
Remote Control
Memorizing
temperature
control "Program" button
B Press the buttons
the remote control (Fig. 9, pos. 2),
until the required temperature (in
degrees centigrade) appears on the
remote control display (Fig. 9, pos.
1).
B You will now be able to memorize
this temperature by keeping the
"Program" button on the remote
6 720 607 740
the
with
the
remote
or
control (Fig. 9, pos. 3) pressed for 3
seconds.
Fig. 9
B Only one temperature can be
memorized using the "Program"
button on the remote control.
B At this point the remote control will
display the memorized temperature .
When the hot water tap is turned on,
water
the boiler will supply hot water for
washing
memorized on the remote control.
on
Using the Remote Control
Memorising water
temperature
at
the
temperature
7
Publicité
Table des Matières
