Westfalia 321 702 300 107 Instructions De Montage page 17

Installation Instructions:
Electrical System for Towing Hitch
20. Screw the ring terminal on the secured side to fuse F6.
21. At the BCM, unlock black connector (slot A), then slide and open the contact support. Unlock
the following cable and insert it into the 3-pin white socket housing provided at the cable
harness.
Cable from chamber 42 into chamber 2 of supplied white housing.
-
22. Insert the black/red individual cable from the cable harness into chamber 43 of the black
connector, which is now free.
23. Slide and reconnect the black contact supports, engage in black cover cap, attach connector
to BCM (slot A) and lock in position.
24. At the BCM, unlock white connector (slot B) and slide the contact support to open it. Unlock
the following cables and insert them into the 3-pin black socket housing provided at the cable
harness.
Orange/brown cable from chamber 21 into chamber 1 of supplied black housing.
-
Orange/green cable from chamber 20 into chamber 3 of supplied black housing.
-
25. Insert the orange/brown and orange/green individual cables from the cable harness into
chambers 20 and 21 of the white connector; make sure that colours are correct.
26. Slide and reconnect the black contact supports, engage in white cover cap, attach connector
to BCM (slot B) and lock in position.
27. Respectively connect the 3-pin black and white housings that are now free.
28. Insert the supplied fuses into the fuse box as follows:
15 A fuses into slots 39, 40 and 41
-
VW Amarok
All manuals and user guides at all-guides.com
321 702 391 101 - 003- 27/11
17