Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Functions
2.
If you select the GIGA PARTY ON at GIGA
PARTY mode
1) If the BEAT WAVING is not set to
STARDUST, EMERALD MOON, SOLAR
BOMB, SHOOTING STAR or STAR
modes, it will automatically switch to one
of those, at random.
2) If selected BEAT WAVING is one of the 5
listed modes, it is maintained.
3) You can select another general mode by
pressing the BEAT WAVING button.
| NOTE |
✎ If you select BEAT WAVING OFF, all the speaker
LED lighting is turned off.
DJ BEAT Function
The DJ Beat function lets you turn on the DJ Beat
sound effect functions. The level of each effect is
adjustable.
Press the DJ BEAT button on the remote control
or on the main unit.
Each time you press this button, the mode
changes as follows:
| IMPORTANT |
✎ You can set each of the DJ Beat functions from
-15 to +15. The initial setting for all functions is 0.
• FLANGER : Creates an effect similar to the
sound of a jet engine revving up and down.
• CHORUS : Creates an effect similar to a singing
chorus.
• WAHWAH : Creates a 'Wah~ Wah~' effect.
• TREMOLO : Repeatedly and rapidly turns the
volume up and down.
• FUZZ : Distorts the original sound to make it
harder and harsher.
• PHASER : Alters the original sound from clear
to dull.
• SLAPBACK : Creates the effect of a slapback
echo following the original sound.
• DJ BEAT OFF : Turns off this function.
+PANNING Function
Increases the left and right speaker's output in
turn and makes it seem as if the sound is moving
from side to side.
| NOTES |
✎ To apply the PANNING effect to another effect,
press the +PANNING button when the other
effect is active or press another effect button
when the PANNING effect is active.
✎ You can control the intensity of the effect with
the EFFECT -, + button.
✎ To cancel an effect, press the effect's button
again.
✎ You can also control the effect using the
EFFECT -, + button on the remote control.
✎ Use the EFFECT -, + button to control the
intensity of the effect that was activated last.
For example, if you activated the WahWah
effect and then the Panning effect, the EFFECT
-, + button will control the Panning effect.
✎ To control the intensity of the effect you
applied first, press the button of effect that you
applied last to turn it off. Then, you can use the
EFFECT -, + button to control the intensity of
the first effect.
✎ First, "DJ BEAT Parameter edit mode" is on by
s button and then you can change parameter
by VOLUME/SEARCH JOG.
NON-STOP MUSIC RELAY Function
The NON-STOP MUSIC RELAY function plays
music continuously without an interval between
tracks/files. If there were two mp3 files, it skips to
the next file's 10 seconds from the start position
when the previous track reaches its 10 seconds
before the end position.
Press the NON-STOP RELAY button on the
remote control.
Each time you press this button, the mode
changes as follows:
NON-STOP RELAY ON ; NON-STOP RELAY
| NOTE |
✎ This function is only available during playback
of a CD/USB.
26
English
OFF
Publicité
Table des Matières
Dépannage
