How to Use
EN
If you need to pay attention to any abnormality during the use of the product, a prompt
will be shown on the screen. You should follow the instructions on the screen to keep the
performance normal.
14
Air duct blocked
Roller brush stuck
Replace the filter
Reset Filter(5 seconds)
The battery runs out
Low battery capacity
Battery is overheating
Error
Check whether the dust cup, carbon
fiber rod, and smart multi-brush bar are
blocked.
Refer to the maintenance guide
[Cleaning the Smart Multi-Brush Bar]
section to clean the fiber material and
hairs wrapped around the oller brush.
Refer to the maintenance manual
[Cleaning Filter] section to
remove the filter and replace it.
Press and hold the button
seconds to enter the countdown to
reset the filter. Wait and until
on the screen, the reset is successful.
Please charge as soon as possible.
Please charge as soon as possible.
Please wait and continue to use after
battery temperature is normal.
Please contact our after-sales service
department for maintenance.
for 5
appears