Leister TRIAC DRIVE Instructions D'utilisation page 11

Warning TRIAC DRIVE
Danger to life when opening the device as live components
and connections are exposed. Unplug the line/mains plug
from the plug socket before opening the device.
Incorrect use of the hot air tool can present a fire and
explosion hazard especially near combustable materials
and explosive gases.
Danger of getting burned! Do not touch the overlap welding
nozzle when they are hot. Let the tool cool down. Do not
point the hot air flow in the direction of people or animals.
Only connect the tool to a receptacle with protective earth
conductor. Any disconnection of the protective earth
conductor, in or outside the tool is dangerous!
Only use extension lead with protective earth conductor .
Caution TRIAC DRIVE
The rated voltage stated on the tool must correspond with
230
the mains voltage.
120
Extract hot-air blower in case of power breakdown.
For personal protection, we strongly recommend the tool to
FI
be connected to an RCCB (Residual Current Circuit Breaker)
before using it on construction sites.
The tool must be operated under supervision.
Heat can ignite flammable materials which are not in view.
The device machine may only be used by qualified specialists
or under their supervision. Children are not authorized to use this
device.
Protect the tool from damp and wet.
11