Fein GRIT GI 150 Mode D'emploi page 15

GI75.book Seite 15 Mittwoch, 19. Juli 2006 7:49 07
GI 75 / GI 150
Lubricate the machine daily (when in use)
with machine oil at the locations marked
(see Instruction label (27)).
Check the drive wheel and the contact
wheel for wear and damage each time when
changing the grinding belt. Have damaged
parts replaced.
Lubricate the bearing points of the tension-
ing device via the lubricating nipple (24) on a
monthly basis.
Warranty and liability.
The warranty for the product is valid in accord-
ance with the legal regulations in the country
where it is marketed.
Specifications.
Type GI 75
Reference
number 7 902.. ..01 00 40 3 ..01 00 40 3 ..01 00 23 3 ..01 00 23 3 ..02 00 40 3 ..02 00 40 3 ..02 00 23 3 ..02 00 23 3
No-load speed
[min] 2 880
Power input
[W] 4 000
Voltage [V] 3x400
Frequency [Hz]
50
Grinding-belt
speed [m/s] 30
Weight accord-
ing to EPTA-
Procedure
01/2003 [kg] 65
Class of protec-
tion I/
Grinding-belt
length [mm] 2 000
Grinding-belt
width [mm] 75
In addition, FEIN also provides a guarantee in
accordance with the FEIN manufacturer's guar-
antee. For further details on this, please contact
your specialist dealer, your national FEIN repre-
sentative, or the FEIN customer service centre.
Declaration of conformity.
The GRIT Corp. declares itself solely responsible
for this product conforming to the documents
and standards given on the last page of this
Instruction Manual.
Environmental protection, disposal.
Stationary machines should be sorted for envi-
ronment-friendly recycling in accordance with
national laws.
GI 75 GI 75 2V GI 75 2V
3 450 2 880 3 450 1 440/2 880 1 730/3 450 1 440/2 880 1 730/3 450
4 000 4 000 4 000 2 600/3 100 2 600/3 100 2 600/3 100 2 600/3 100
3x440 3x230 3x220
60 50 60
36 30 36
65 65 65
I/ I/ I/
2 000 2 000 2 000
75 75 75
GI 75 2H GI 75 2H GI 75 2H2V
3x400 3x440 3x230
50 60 50
15/30 18/36 15/30
65 65 65
I/ I/ I/
2 000 2 000 2 000
75 75 75
EN
GI 75 2H2V
3x220
60
18/36
65
I/
2 000
75
15