Using The Marking/Etching Wand (Optional); Marking Kits; Selecting The Proper Mode; Surfox Testing Devices - Walter Surface Technologies SURFOX 205 Manuel De L'utilisateur

8

Using the marking/etching wand (optional)

Using the marking/etching wand (optional)
A) Marking kits
Standard kit (54-B 080) includes:
• 1 marking/etching wand with
graphite insert
• 35 mm X 10 mm
and connecting cable
• 20 marking pads
• 5 O-Rings
• 1 SURFOX-M, 100 ml solution
• 1 SURFOX-E, 100 ml solution
B) Selecting the proper mode
Turn the selector knob to the marking/etching wand icon.
Use the marking/etching wand to permanently mark or etch
your company name, logo, part number or other desired
information onto the surface using permanent or disposable
stencils. Plug the marking/etching wand into the accessory
outlet on the front panel.
On stainless steel, use AC and SURFOX-M to do a marking;
use DC and SURFOX-E to make an etching. On aluminum,
use DC and SURFOX-M ALU to make a black marking. On
titanium, use AC and SURFOX-M to do a blue marking.
C) SURFOX testing devices
SURFOX Smart Passivation Tester
(54-T 011)
To monitor the state of corrosion
protection and to ensure proper
passivation of the workpiece.
Corrosion resistance of stainless
steel is significantly reduced near
welds as a result of the heating
cycle. Visually, this can be seen
as a darkened zone next to the
weld. When electro-chemical cleaning is
performed on the weld, corrosion risk is
reduced but the treated zone still has to
be passivated for 24-48 hours before
the corrosion protection is fully restored.
12
PRO kit (54-B 081) includes:
• 1 marking/etching wand
with graphite insert
• 35 mm X 10 mm
and connecting cable
• 20 marking pads
• 5 O-Rings
• 1 SURFOX-M, 100 ml solution
• SURFOX solution, 100 ml
• 1 Stencil printer and software
• 1 Stencil paper roll 100 mm (W)
X 20 m (L)
INOX / STAINLESS
Stainless steel Grade
Identification Testing Device
(54-T 001)
Informs you on the type of
stainless steel you are really
working with.
Because it is visually impossible
to differentiate 200, 300 and 400
grade stainless steel, the testing
device instantly identifies the grade
of stainless steel.
TECHNICAL BULLETINS AVAILABLE ON OUR WEB SITE.
AC DC
Cleaning Polishing
Marking Etching