Accessories; Selection And Mounting Of The Cleaning Pads And Tips - Walter Surface Technologies SURFOX 205 Manuel De L'utilisateur

10

Accessories

Accessories
Brush Adaptor Part
no: 54-B 149
1 per package
A) Selection and mounting of the cleaning
pads and tips
Tungsten tips are made from high quality tungsten alloy
material. Other materials will not resist the harsh environ-
ment created by the electrochemical process.
!
WARNING
cause damage to the cleaning pads.
O-Ring
Inserts
Tungsten insert 90°
No: 54-B 143
Use with cleaning pad 54-B 026
or 54-B 040 and clamp ring 54-B 002
or boot 54-B 005.
Large graphite insert
No: 54-B 009
Use with large cleaning pad 54-B 043
Ideal for large welded areas
and for surface renovation.
14
When the insert is too worn, it can
Worn edges on insert.
Carbon fiber brush
Part no: 54-B 158
5 per package
Ideal for tight corners,
narrow surfaces and
intricate areas
TIP
. Resurface the insert using a bench grinding
wheel or angle grinder.
Note: Be sure to install the O-Ring located at the back of the insert
whenever they are changed.
Narrow tungsten insert 90°
No: 54-B 017
Use with cleaning pad 54-B 028 or
54-B 041 and clamp ring 54-B 020
or boot 54-B 007.