Mounting And Operation - Bosch Fontus 18V Notice Originale

10 | English
Cordless pressure cleaner
Serial number
Permitted ambient temperature
– during charging
B)
– and operation
– during storage
Battery type
A)
Depends on battery in use
B)
Limited performance at temperatures < 0 °C
Noise/Vibration Information
Noise emission values determined according to EN
60335-2-79.
Typically the A-weighted noise levels of the product are:
Sound pressure level 67 dB(A); sound power level
78 dB(A). Uncertainty K = 4,0 dB.
Overall vibrational values a (vector sum of three directions)
h
and uncertainty K determined according to
2
EN 60335-2-79: a = 0,4 m/s , K = 0,5 m/s
h

Mounting and Operation

Representation/Action Ob-
jective
Product Features
Delivery scope
Filling the water tank
Fill water tank with mains water
connection
Fill water tank with mains water
connection (continuous)/auto-
matic filling
Battery charging and inserting
Carrying and transporting
Connecting the hose
Switching on
Adjusting the pressure setting
Spray-pattern variants
Using the brush
Switching off
Disconnecting the hose
Removing the battery
Maintenance
Storage
Accessories
F 016 L94 184 | (09.01.2023)
Switching on
Inserting/removing the battery (see figures D
and L)
Note: Using unsuitable batteries can lead to malfunctions or
damage the machine.
Press the battery compartment release button (15) to open
the battery compartment cover (14). Insert the charged bat-
tery (19). Make sure that the battery is fully fitted.
Close the battery compartment cover (14) nd make sure
that the battery release button (15) is engaged. The battery
2
.
compartment cover (14) protects the battery (19) against
splash water during use.
Press the battery compartment release button (15) to open
the battery compartment cover (14). To remove the battery
(19) from the machine, press the battery release button
Figure Page
(20) and pull the battery out.
A 182
Operation
B 183
C1 183
Starting
C2 184
Always use fresh water to fill the internal tank either directly
or via the water connection. Check if the fillter (10) is inser-
C3 184
ted and undamaged (see figures C1 and C2).
Connect the hose (4) to the water outlet (9) and the spray
gun (18) (see figure F).
D 185
Select the desired spray pattern by rotating the nozzle head
E 185
(1) (see figure I).
Select the desired jet strength with the pressure selector
F 186
(12) (see figure H).
G 186
Press the On/Off switch (13) and pull and hold the trigger
H 187
(2) until water comes out (see figure G).
I 187
Note: It can take up to 10 seconds for water to come out
J 188
when the product is first used after the water tank has been
emptied.
K 189
Autostop Function
L 189
The machine is designed to switch off the motor as soon as
M 190
the spray-gun trigger (2) is released.
N 190
Auto-off Function
O 191
The motor switches off when the product runs continuously
for 30 minutes.
See serial number (nameplate) on machine
°C
°C
°C
1.5 Ah, 2.0 Ah, 2.5 Ah, 3.0 Ah, 4.0 Ah, 5.0
Bosch Power Tools
Fontus 18V
0 ... +45
+5 ... +50
-20 ... +50
PBA 18V...W-.
Ah, 6.0 Ah