Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Sabbath Mode
Sabbath mode is designed for the traveler or for those whose
religious observances require turning off the lights and ice maker.
By selecting this feature, the temperature set points remain
unchanged, the ice maker will be disabled, the interior lights
will turn off, and the audio tones are muted. For most efficient
refrigerator operation, it is recommended to exit Sabbath mode
when it is no longer required.
Press the SABBATH touch pad to turn on Sabbath mode. This
■
feature will remain on until Sabbath is pressed again.
NOTE: If the Max Cool or Max Ice feature has been selected
prior to turning on Sabbath mode, Max Cool and Max Ice will be
automatically canceled upon entering Sabbath mode.
Filter Reset
See "Water Filter Indicator" in the "Water Filtration System"
section.
Alarm Functions
Alarm Reset
Pressing any Home Screen touch pad (Fridge, Freezer or Options)
will turn off the audio alarm and indicator light. The audio alarm
will not sound again for the current condition that caused the
alarm until a new condition occurs.
An Alarm Reset can be performed by pressing any Home Screen
touch pad (Fridge, Freezer or Options), or by turning the power
to the refrigerator off and on again. See "Power On/Off Switch."
After performing an Alarm Reset, the indicator light will reactivate
if the condition that caused the alarm is still present. See "Door
Open," "Over Temperature" or "Power Outage."
Door Open
An alarm will sound when a door has been open for longer than
5 minutes. Closing the door or drawer, or pressing any Home
Screen touch pad (Fridge, Freezer or Options) will reset the Door
Open feature and turn off the audio alarm.
NOTE: If the door(s) or drawer are left open for 10 minutes the
interior lights will go out. Closing the open door(s) or drawer will
reset the lights.
Over Temperature
IMPORTANT: If the Over Temperature Alarm activates, your food
may spoil. See "Power Interruptions." Minimize door openings
until temperatures return to normal.
The Over Temperature feature is designed to let you know when
either the refrigerator temperature rises above 48°F (9°C) or
the freezer temperature rises above 15°F (-9°C) for longer than
1½ hours. The audio alarm will shut off automatically when the
temperature returns to normal, but the indicator light will continue
to flash to let you know that an Over Temperature condition
occurred until an Over Temperature reset has been performed.
Press any Home Screen touch pad (Fridge, Freezer or Options) to
turn off the indicator light.
If the over temperature condition is still present when an Over
Temperature reset is performed, the indicator light will continue
to reactivate every 1½ hours until refrigerator and freezer
temperatures are below 48°F (9°C) and 15°F (-9°C), respectively.
Power Outage
When a power outage occurs, a Power Outage indicator light will
be displayed. Press any Home Screen touch pad (Fridge, Freezer
or Options) to turn off the indicator light. The power outage
indicator light will not display when either Cooling Off or Sabbath
mode is active, but will appear after exiting Sabbath mode if a
power outage occurred.
8
Ice Maker and Storage Bin
IMPORTANT: After connecting the refrigerator to a water source
or replacing the water filter, fill and discard two full containers of
ice to prepare the water filter for use, before using the ice.
Turn the Ice Maker On/Off
1. To turn ON the ice maker, simply lower the wire shutoff arm.
NOTE: Your ice maker has an automatic shutoff. As ice is
made, the ice cubes will fill the ice storage bin and the ice
cubes will raise the wire shutoff arm to the OFF (arm up)
position. Do not force the wire shutoff arm up or down.
2. To manually turn off the ice maker, lift the wire shutoff arm to
the OFF (arm up) position and listen for the click.
Ice Storage Bin Care
NOTE: It is normal for ice to stick together in the ice bin. It
is recommended that the ice bin be emptied and cleaned as
needed.
To clean the ice storage bin:
1. Slide the ice bin out of the freezer, and then lift up and out.
2. Empty the ice bin. Use warm water to melt the ice if
necessary.
NOTE: Do not use anything sharp to break up the ice in the
bin. This can cause damage to the ice bin and the dispenser
mechanism.
3. Wash ice bin with warm water and a mild detergent, rinse well
and dry thoroughly. Do not use harsh or abrasive cleaners or
solvents.
REMEMBER:
Allow 24 hours to produce the first batch of ice.
■
It may take 3 to 4 days for the ice bin to completely fill, if no
■
ice is used.
The quality of your ice will be only as good as the quality of
■
the water supplied to your ice maker.
Avoid connecting the ice maker to a softened water supply.
■
Water softener chemicals (such as salt) can damage parts of
the ice maker and lead to poor quality ice. If a softened water
supply cannot be avoided, make sure the water softener is
operating properly and is well maintained.
It is normal for the ice cubes to be attached at the corners.
■
They will break apart easily.
Do not store anything inside the ice bin.
■
Water Filtration System
Do not use with water that is microbiologically unsafe or
of unknown quality without adequate disinfection before
or after the system. Systems certified for cyst reduction
may be used on disinfected waters that may contain
filterable cysts.
Publicité
Table des Matières
