Unit Of Measure - SystemAir BF 100MX Manuel D'instructions

1) RUN HOURS MONITOR
The unit is equipped with a run hours monitor.
Upon power-up the running hours counter is displayed as follows, e.g.:
run y01 (1year) N04 (4months) d06 (6days) h13 (13hours) run...
Due to the 7 segment display format, the "M" cannot be used for months and it is displayed with N in its
place.

2) UNIT OF MEASURE

The air flow unit of measure displayed is m
To convert the unit of measure in l/s (liter/second), press at the same time the buttons MENU and - for at
least 3 seconds.
3) MINIMUM CONTINUOUS SPEED
Upon power-up, the unit runs at the minimum continuous speed settable from 0 to 47m
13l/s) in the following way:
- press the MENU button until the "A" (A) letter is displayed.
- press the buttons + or - to increase or decrease the minimum continuous speed between the values shown
in the table below:
4) INTERMEDIATE SPEED
The unit runs automatically at the intermediate speed settable from 22 to 90m
either of the below conditions have been met:
- the humidistat has been activated.
- the run-on timer has been activated.
The intermediate speed can be set in the following way:
- press the MENU button until the "b" (b) letter is displayed.
- press the buttons + or - to increase or decrease the intermediate speed between the values shown in the
table below:
16
/h (cubic meter/hour) and identified with the "u" (u).
3
UNIT OF MEASURE (u)
Setting
m /h (default)
3
l/s
MINIMUM COUNTINUOUS SPEED (A)
m /h Display
3
0
A00
14 (default)
A14
22
A22
29
A29
36
A36
47
A47
Value Displayed
Nh
LS
l/s Display
0
A00
4
A04
6
A06
8
A08
10
A10
13
A13
/h (i.e. from 6 to 25l/s) when
3
/h (i.e. from 0 to
3