Using Advanced Setup - Casio GRAPH95 Mode D'emploi

Masquer les pouces Voir aussi pour GRAPH95:
Table des Matières

Publicité

3 Using Advanced Setup

Advanced Setup provides you with total control over a number of parameters that you can
adjust to configure the EA-200 setup that suits your particular needs.
The procedures in this section provide the general steps you should perform when using
Advanced Setup to configure an EA-200 setup, and to returns setup settings to their initial
default values. You can find details about individual settings and the options that are
available with each setting are provided by the explanations that start on page 3-3.
k Advanced Setup Operations
u To configure an EA-200 setup using Advanced Setup
The following procedure describes the general steps for using Advanced Setup. Refer to the
pages as noted for more information.
1. Display the E-CON2 main menu (page 1-1).
2. Press 1(SET). This displays the "Setup EA-200" submenu.
3. Press 2(ADV). This displays the Advanced Setup menu.
4. If you want to configure a custom probe at this point, press f(Custom Probe). Next,
follow the steps under "To configure a custom probe setup" on page 4-1.
• You can also configure a custom probe during the procedure under "To configure Channel
Setup settings" on page 3-3.
• Custom probe configurations you have stored in memory can be selected using Channel
in step 5, below.
5. Use the Advanced Setup function keys described below to set other parameters.
• b(Channel) .... Displays a screen that shows the sensors that are currently
• c(Sample) ..... Displays a screen for selecting the sampling mode, and for
3-1
Using Advanced Setup
assigned to each channel (CH1, CH2, CH3, SONIC, Mic). You can
also use this dialog to change sensor assignments. See "Channel
Setup" on page 3-3 for more information.
specifying the sampling interval, the number of samples, and the
warm-up mode. When "Fast" is selected for "Mode", this dialog box
also displays a setting for turning FFT (frequency characteristics)
graphing on and off. See "Sample Setup" on page 3-5 for more
information.
Advanced Setup Menu

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Graph75+eGraph75+Graph35+eGraph35+Graph25+eGraph25+pro

Table des Matières