Installation Procedures; Cleaning & Maintenance - Wellis Bellini Guide D'installation

| EN |

Installation Procedures

Please install the connection hose into the wall according to the installation Procedures.
Water
heater
Usage
How to operate the handle
– Raise the handle up for opening water; push
it down for close!
– Turn the handle to the left to increase hot
water flow for higher water temperature,
and lower water temperature by operating
reversely!
Open – Close
Cleaning & Maintenance
To keep the product clean & shining, follow the as below:
1. Flush with clean water & dry with soft cloth only!
2. If any dirt, clean with soft liquid or transparent glass detergent!
3. Do not use any scrubbing detergent, polisher, sane-cloth, paper tissue or scraper!
4. Do not use acid detergent, indissovable grain-like detergent or soap!
5. Circumrotate the aerator off and clean it when necessary!
The operation of our shower panels and faucets is designed for the ideal water pressure
between 3.5-4.5 bar.
Cold
connection
hose
Hot
connection
hose
Left Right
hot cold
water water
Sealed
tape
The diverter instruction:
– Pull the diverter up and then the
showerhead come out Meanwhile the
aerator turn off;
– Contrarily fixing the diverter down, the
aerator come out and then showerhead
turn off.
Diverter
| 3 |
Diverter