Installation Instructions - Wellis Bellini Guide D'installation

| 2 |
Bellini bath shower
List of the standard accessories
Please double-check the accessory list hereinafter and contact our company or our distributor for
any unconformity.
Remarks:
– Without affecting their performancing, accessories may be changed without further notice;
– Drawings for reference only, Product size & shape refer to actual faucet.

Installation Instructions

1. Do not disassemble the main body, as it has been installed & commissioned correctly &
precisely before leaving the factory!
2. To avoid the faucet from jamming, do flush the water pipe before installation!
3. After installation, make sure every joint safely sealed & no
leaking!
4. Using condition: Working pressure at 0.05-1.0 MPa
(including cold & hot water pressure), with applicable water
temperature: 4 °C-90 °C.
5. Make sure to connect the hot/cold inlet pipe correctly, if
standing in front, hot water pipe connecting to the left & cold
water pipe connecting to the right!
Code The Accessory list
1 Main body
2 Flange
3 O-ring
4 Eccentric nut
Aerator
Do not
disassemble!
| EN |
Quantity
1
2
2
2
Flush
the pipe!