GYS Energy 124 Manuel D'utilisation page 11

Translation of the original instructions
• If the internal fuse is blown, it must be
replaced by the manufacturer, its after-
sales service or an equally qualified
person.
• Regularly take off the cover and remove
dust with an air gun. Take the opportunity
to have a qualified person check the
electrical connections with an insulated
tool.
• Under no circumstances should solvents
or other aggressive cleaning agents be
used.
• Clean the device's surfaces with a soft,
dry cloth.
Réglementation :
• The device complies with European
Directive.
• The certificate of compliance is available
on our website.
• EAC conformity mark (Eurasian Economic
Commission)
• Equipment in compliance with British
requirements. The British Declaration of
Conformity is available on our website
(see home page).
• Equipment in conformity with Moroccan
standards.
• The declaration C‫( م‬CMIM) of conformity
is available on our website (see cover
page).
ENERGY 124 / 126
EN
11