GYS Energy 124 Manuel D'utilisation page 10

Translation of the original instructions
Connection / disconnection:
• Disconnect the power supply before
• The terminal of the battery that is not
• After the charging process, disconnect
Connection:
• Class II device.
• This machine is fuse-protected.
Maintenance:
• If the power supply cable is
• Service should be performed by a
• Warning! Always remove the power plug
10
ENERGY 124 / 126
connecting/disconnecting the device to/
from the battery.
connected to the car frame must be
connected first. The other connection
must be made on the car frame, far from
the battery and the fuel line. The battery
charger must be connected to the power
supply network.
the battery charger from the power supply
network and remove the connector from
the car frame and then the connector
from the battery, in this order.
damaged, it must be replaced by the
manufacturer, its service agent or an
equally qualified person.
qualified person.
from the wall socket before carrying out
any work on the device.
EN