Functions - Power Fist 8067928 Manuel Du Propriétaire

8067928manual 8/22/05
• Do not touch the nozzle of the heat gun for 30 minutes directly after
use. It will be extremely hot and will burn.
• Always allow the heat gun to cool down before storage.
• To cool the heat gun place it in the upright position.
• Always clean the nozzle and accessories after each use as old residue
could ignite over time.
• Always store in a safe place out of reach of children.
• Only use original accessories.
• Do not attempt tasks outside the capacity of this tool.

Functions

• Removing paint and varnish
• Drying wet and damp objects
• Loosening rusty nuts and screws
• Loosening over-tight nuts and screws
• Thawing frozen copper pipes
• Shrinking PVC shrink wrap
• Drying wet timber prior to filling
• Removing old putty from window frames
• Highlighting natural wood grain before varnish
Specifications
Model: 8067928
Power Input: 1,500 Watts
Temperature: Position 1 - 375 ºC / Position 2 - 495 ºC
Airflow: Position 1 - 400 L/min / Position 2 - 550 L/min
Weight: 1.5 lbs (0.7kg)
5:28 PM Page 3
• Drying metal surfaces
• Removing stickers
• Stripping floor coverings
• Shaping plastic
• Soft soldering
• Soldering plumbing joints
• Drying paint and varnish