Protecting The Environment; Service Information - Stanley STDH8013 Mode D'emploi

• If the equipment / tools are equipped with independent
battery pack, please turn off the power and remove the
battery pack from the equipment / tools.
• If the equipment / tools are equipped with an integrated
battery, please run out the battery, before turning off its
power.
• Before the cleaning, unplug the charger plug from the
power source. In addition, except the regular cleaning on
your charger, no other maintenance is needed.
• Regularly use the soft brush or dry cloth to clean the
ventilation slot of the equipment / tools / charger.
• Regularly use a damp cloth to clean the motor housing.
Please do not use any abrasive cleaning agents or
solvent-based cleansing agents.
• Regularly open the clamping chuck and tap it gently to
remove any internal dust (after installation).
Cleaning
Warning! Once the visible dust build-up is found
at and/or around the ventilating ports,
immediately flush the dust and powder within the
host shell with clean dry air. To perform this procedure, wear
the approved safety equipment and dust mask.
Warning! It is strictly forbidden to clean the
non-metallic parts of the tool with the solvents or
other irritant chemicals. These chemicals may weaken the
materials of these components. Use a cloth moistened with
a mild soapy water to clean it. Do not let any substance
permeate into the tool and.do not immerse any part of the
tool into a liquid.

Service Information

STANLEY offers a full network of company-owned and
authorized service locations throughout Asia. All STANLEY
Service Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool
service.Whether you need technical advice, repair, or
genuine factory replacement parts, contact the STANLEY
location nearest to you.
(Original instructions)
Notes
• STANLEY's policy is one of continuous improvement to
our products and, as such, we reserve the right tochange
product specifications without prior notice.
• Standard equipment and accessories may vary by
country.
• Product specifications may differ by country.
• Complete product range may not be available in all
countries. Contact your local STANLEY dealers for range
availability.

Protecting the environment

Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your STANLEY product needs
replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for raw
materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
STANLEY provides a facility for the collection and recycling
of STANLEY products once they have reached the end of
their working life. To take advantage of this service please
return your product to any authorised repair agent who will
collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local STANLEY office at the
address indicated in this manual. Alternatively, a list of
authorised STANLEY repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
ENGLISH
9