gdw 1226 Instructions De Montage page 5

Volvo V70 Break '00
03/2000 - ....
Ref. 1226
Fitting instructions
1) Disassemble the bumper and permanently remove the support of the exhaust and towing ring.
2) Place mounting pieces (-e) and (-f) with points (A) on the freed screw-thread drillings (see photo 1,2).
Insert bolts and washers but do not tighten anything yet.
Place the tow bar with points (B) and (B') on points (B) and (B') of the already assembled parts (-e) and
3)
(-f), insert bolts and washers and tighten everything firmly.
4) Before replacing the bumper, make an incision at the bottom (see drawing).
5) Assemble (*) and tighten firmly.
Composition
Tow bar reference 1226
1 ball T43M006
4 bolts M12x40
1 security shackle (800053)
10 bolts M12x35
2 nuts M12
14 security washers M12
1 mounting piece (-e)
1 mounting piece (-f)
2 rivets SNU1219ZGJ
2 screws
1 socket holder P03
All bolts and nuts : quality 8.8
Note
Please consult your cardealer or owners manual for the maximal permissable towing mass.
Remove any bitumen coating on the fastening position for the tow bar.
When drilling, be carefull not to damage any brake lines, electrical wiring or fuel lines.
(*-*')
(*-*')
(*')
(A-B-B')
(B')
(A-B-B'-*-*')
(B-B')
(B-B')