Technical Specifications - HYDAC ELECTRONIC HMG 510 Mode D'emploi

13. T echnical specifications
The HMG 510 features two analogue inputs with automatic sensor recognition
on 2 input jacks (channel A and B).
Only HSI sensors (pressure, temperature or flow rate transmitters) and
E
SMART sensors (moisture, temperature and flow rate sensors) can be
connected.
Channel A and B:
 Automatic sensor recognition for HSI and SMART sensors; automatic
setting of the measurement range and unit of measurement
 Measured value differential for channel A - B
Measurement accuracy of the input channels:
 ≤ ± 0.1 % of the measurement range
Sampling rate:
 0.1 ms
Measurement and display:
 Current measured value
 Min/max values
 Measured value differential
 Change of the unit of measurement
Dimensions and weight:
 Measurements:
 Weight:
Operating/ambient conditions:
 Operating temperature:
 Storage temperature:
 Relative humidity:
Operating time using 9 V battery (2 sensors):
 approx. 10 hours
Standards with which the HMG 510 complies:
 EMC:
 Safety:
 Protection class:
50
100 x 170 x 40 mm
410 g
5 .. 60 °C
- 40 .. 70 °C
0 .. 70 %
EN 61326-1+A1+A2
EN 61010
IP 54