Rendering And Modification Of; Operating The Hmg 510 With A Pc - HYDAC ELECTRONIC HMG 510 Mode D'emploi

11.2 Rendering and modification of the measured value display
The first measured value appears in the display of the HMG 510.
E
The unit of measurement appears in the upper part of the display and the
associated measured value in the lower part.
Use the arrow keys ( ) to switch between the various measured values of
the connected SMART sensor.

11.3 Operating the HMG 510 with a PC

To have the HMG 510 display the measured values of a HYDACLab on a PC
®
or read out the data from the measured value memory, you additionally need:
 Desktop or laptop with drivers and CMWIN software installed
 USB cable (supplied with the unit)
For detailed information on these functions, please refer to the user's guide
of the CMWIN software and the manual of the sensor being used.
47