Disposal; About Your Hmg 510 - HYDAC ELECTRONIC HMG 510 Mode D'emploi

 Troubleshooting and repair work may only be done by HYDAC Service.
 All relevant and generally recognized safety requirements must be adhered to.

4. Disposal

Notes regarding disposal
This product may not be disposed together with the houshold
waste.
You may return your electric and electronic devices which are no
longer usable, as well as batteries and battery packs, back to the
relevant HYDAC subsidiaries or directly to:
HYDAC SYSTEMS & SERVICES GMBH
Friedrichsthaler Str. 15,
66540 Neunkirchen / Germany
If the disposal is carried out by your company, the respective applicable
country-specific regulations have to be observed.

5. About your HMG 510

Items supplied:
 HMG 510
 Manual Ger/Eng/Fra
 9 V battery
 USB cable
 Y adapter, blue (for HLB 1000)
Operating/Ambient Conditions:
Operating temperature:
Storage temperature:
Relative humidity:
Power Supply:
A standard 9 V-battery is sufficient for operation. The unit can also be operated
using the AC mains adaptor plug listed under Accessories.
If you have any questions, suggestions, or encounter any problems of a
technical nature, please contact your HYDAC sales office.
 Y adapter, yellow (for CS 1000)
 Sensor cable M12x1 (2 m)
 CD-ROM with CMWIN software
 Case for HMG 510
5 ... 60 °C
- 40 ... 70 °C
0 ... 70 %
E
33