HYDAC ELECTRONIC HMG 510 Mode D'emploi page 37

The time period always begins
when the min/max values are reset.
Resetting the values is triggered by
the following situations:
 Switching the unit on
 Pressing the Reset button
 Connecting or disconnecting an
HSI sensor
To access the min or max value
display, press the Min/Max key:
 press 1 x: Minimum value
 press 2 x: Maximum value
 press 3 x: Back to measured
value display.
Note that in the measured value
display, only the minimum or only the
maximum value for both channels A
and B are shown together.
To reset the min/max values, press
the Reset button.
E
37