Connecting Smart Sensors - HYDAC ELECTRONIC HMG 510 Mode D'emploi

1.3 Connecting SMART sensors

SMART sensors are one of the new generation sensors from HYDAC,
E
capable of outputting up to 10 different measured variables.
These sensors are also automatically recognized by the HMG 510 via HSI.
The measured values including the unit of measurement are shown in the
display.
Only one SMART sensor can be connected to the HMG 510, however it can
be connected to both channels (A and B).
Depending on the sensor type the sensor features an internal memory
enabling the storage of recorded measurement data on a long-term basis. In
addition, depending on the sensor type preset parameters can be changed
and stored in the internal memory as a sensor configuration.
When you connect the HMG 510 to a PC, HYDAC's CMWIN software enables
you to read out the measured value memory of a SMART sensor and/or
modify the sensor's parameters.
31