Fuel Safety - Husqvarna Soff-Cut 2000 Manuel D'utilisation

Masquer les pouces Voir aussi pour Soff-Cut 2000:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Parking brake
Make sure that the product does not move when the
parking brake is applied.
Plug to dust extractor connection
Always use the plug if the product is not connected to a
dust extractor.
To examine the protective guards
WARNING:
defective protective guards. Do a check of
the protective guards before you operate
the product. If the protective guards are
defective, speak to your Husqvarna service
agent.
1. Examine the blade block and the blade block guard,
the floating side cover, the safety frame, the drive
belt cover, the plug, and the muffler guard for
damage.
2. Replace the protective guards if they are damaged.
3. Make sure that the protective guards are correctly
attached before you start the product.
46
All manuals and user guides at all-guides.com
Do not use a product with

Fuel safety

WARNING:
instructions that follow before you use the
product.
Fuel is flammable and the fumes are explosive. Be
careful with fuel to prevent injury, fire and explosion.
Do not breathe in the fuel fumes. The fuel fumes are
poisonous and can cause injury. Make sure that the
airflow is sufficient.
Do not remove the fuel tank cap or fill the fuel tank
when the engine is on.
Let the engine become cool before you refuel.
Do not fill fuel in an indoor area. Not sufficient airflow
can cause injury or death because of asphyxiation or
carbon monoxide.
Do not smoke near the fuel or the engine.
Do not put hot objects near the fuel or the engine.
Do not fill fuel near sparks or flames.
Before you refuel, open the fuel tank cap slowly and
release the pressure carefully.
Fuel on your skin can cause injury. If you get fuel on
your skin, use soap and water to remove the fuel.
If you spill fuel on your clothing, change clothing
immediately.
Do not fill the fuel tank fully. Heat causes the fuel to
expand. Keep a space at the top of the fuel tank.
Tighten the fuel tank cap fully. If the fuel tank cap is
not tightened, there is a risk of fire.
Before you start the product, move the product to a
minimum of 3 m/10 ft from where you refueled.
Do not start the product if there is fuel or engine
oil on the product. Remove the unwanted fuel and
engine oil and let the product dry before you start the
engine.
Examine the engine for leaks regularly. If there are
leaks in the fuel system, do not start the engine until
the leaks are repaired.
Do not use your fingers to examine the engine for
leaks.
Keep fuel in approved containers only.
When the product and fuel is in storage, make sure
that fuel and fuel fumes cannot cause damage.
Drain the fuel in an approved container outdoors and
away from sparks and flames.
Exhaust fumes safety
WARNING:
instructions that follow before you use the
product.
The exhaust fumes from the engine contain carbon
monoxide which is an odourless, poisonous and very
dangerous gas. To breathe carbon monoxide can
cause death. Because carbon monoxide is odourless
Read the warning
Read the warning
793 - 001 - 19.04.2022

Publicité

Table des Matières
loading

Table des Matières