Husqvarna Soff-Cut 2000 Manuel D'utilisation page 52

3. Lift up the lever to disengage the parking brake.
4. Align the front pointer (A) and the kerf guide (B) with
the line where you will cut.
B
5. Pull the throttle control up fully.
Note:
Always operate the engine at full engine
speed for maximum capacity.
52
All manuals and user guides at all-guides.com
A
6. Pull the cutting depth handle in the direction of the
handlebar and carefully lower the blade.
7. Push the forward speed lever in the direction of
"FAST" to move the product forward. Start slow and
increase the speed until you get the correct cutting
speed.
Note:
Do not push the product.
793 - 001 - 19.04.2022