Provide for sufficient ventilation dur-
ing operation. Do not operate the bat-
tery charger in enclosed cabinets or in
close vicinity to heat sources. Ambi-
ent temperatures in excess of +45 °C
can lead to malfunctions.
Do not charge non-rechargeable bat-
teries. Otherwise there is danger of
fire and explosion.
Keep the battery charger clean. Con-
tamination can lead to danger of an
electric shock.
Before each use, check the battery
charger, cable and plug. If damage is
detected, do not use the battery
charger. Never open the battery
charger yourself, and have repairs
carried out only by Fein or an author-
ized Fein service agent. Damaged bat-
tery chargers, cables and plugs
increase the risk of an electric shock.
Symbols, abbreviations and terms used.
Symbol, character
WARNING
X
Explanation
Make sure to read the enclosed documents such as the Instruction Manual and the General
Safety Instructions.
Before commencing this working step, pull the mains plug out of the socket.
Confirms the conformity of the battery charger with the Guidelines of the European
Community.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
Recycling symbol: designates recyclable materials
Worn out battery chargers and other electro-technical and electrical products should be
collected separately and sorted for environment-friendly recycling.
Product with double or reinforced insulation
Battery type
Weight according to EPTA-Procedure 01/2003
Time-lag device fuse, whereby X represents the character for the time/power character-
istic acc. to IEC 60127.
Use the device only in rooms and do not subject it to rain.
Remove the battery from the charger
and pull the mains plug when not
using for extended periods. Saving
energy helps to save the environment.
When cleaning the battery charger,
pull the mains plug out of the socket.
There is danger of electric shock.
Do not rivet or screw any name-plates
or signs onto the battery charger. If
the insulation is damaged, protection
against an electric shock will be inef-
fective. Adhesive labels are recom-
mended.
Charge only intact original Fein bat-
teries that are intended for your
power tool. When charging incorrect,
damaged, repaired or reconditioned
batteries, imitations or other brands,
there is danger of fire and/or explo-
sion.
en
9