Installing Updates For The Home Connect Software; Information On Data Protection - Gaggenau RB 28 Notice D'utilisation

en-us
Home Connect
Press –/+ freezer compartment button.
3.
The freezer compartment temperature display shows
an animation for 15 seconds.
The freezer compartment temperature display then
shows OF.
The Home Connect settings have been reset.
Installing updates for the Home
Connect software
The refrigerator checks at regular intervals whether
updates are available for the Home Connect software.
If an update is available, the refrigerator compartment
temperature display shows UP.
Press any button to reset the display to the set
temperature.
Installing the update:
1. Press · button.
The refrigerator compartment temperature display
shows Cn.
Press –/+ refrigerator compartment button until the
2.
refrigerator compartment temperature display
shows UP and the freezer compartment temperature
display shows OF.
Press –/+ freezer compartment button.
3.
The freezer compartment temperature display shows
an animation.
The update is installed.
All buttons are locked during installation.
– If the installation has been successfully
completed, the freezer compartment temperature
display will show On.
– If the installation has not been successfully
completed, the freezer compartment temperature
display will show Er.
Start the update again at a later time.
If the installation has still not been successfully
completed after several attempts, inform customer
services.
18

Information on data protection

The first time your Home Connect appliance is registered
on the WLAN network connected to the Internet, your
appliance will transmit the following types of data to the
Home Connect server (initial registration):
Unique appliance identification (consisting of
▯
appliance codes as well as the MAC address of the
installed Wi-Fi communication module).
Security certificate of the WiFi communication module
▯
(to ensure a secure data connection).
▯ The current software and hardware version of your
domestic appliance.
Status of any previous resetting to factory settings.
▯
This initial registration prepares the Home
Connect functions for use and is only required when you
want to use these Home Connect functions for the first
time.
Note: Please note that the Home Connect functions can
only be utilized with the Home Connect app. Information
on data protection can be called up in the Home
Connect app.