Venting Methods; Important - Ancona Glass Canopy 30 Mode D'emploi

• This range hood is factory set for venting through the roof or wall.
• Vent work can terminate either through the roof or wall. To vent through a wall, a 90° elbow is needed.

IMPORTANT:

NEVER exhaust air or terminate duct work into spaces between walls, crawl spaces, ceiling,
•
attics or garages. All exhaust must be ducted to the outside.
WARNING - TO REDUCE RISK OF FIRE, USE METAL/ALUMINUM DUCT WORK ONLY
•
Fasten all connections with sheet metal screws and tape all joints with certified aluminum or foil tape.
•
Please check the building codes in your city to learn which tape product is recommended
•
Use caulking to seal exterior wall or roof opening around the cap.

VENTING METHODS:

HORIZONTAL VENTING WALL EXHAUST
TOP VENTING ROOF EXHAUST
7