Level Range - KitchenAid KFGG500ESS Instructions D'installation

Masquer les pouces Voir aussi pour KFGG500ESS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6. Repeat steps 1 and 2 to ensure that the range foot is
engaged in the anti-tip bracket.
If the rear of the range lifts more than 1/2" (1.3 cm) off
the floor without resistance, the anti-tip bracket may not
be installed correctly. Do not operate the range without
anti-tip bracket installed and engaged. Please reference
the "Warranty" section of the User Instructions to contact
service.

Level Range

Determine if you have AquaLift
referring to the "Range Care" section of the User Instructions.
For Ranges with AquaLift
®
1. Place level on the oven bottom as indicated in one of the
two figures below, depending on the size of the level. Check
with the level side to side and front to back.
2. If range is not level, pull range forward until rear leveling leg
is removed from the anti-tip bracket.
3. Follow the directions in Style 1 or Style 2, depending on the
style of drawer supplied with the range.
®
AQUALIFT is a registered trademark of Whirlpool, U.S.A.
Technology or Steam Clean by
®†
Technology or Steam Clean:
For Ranges without AquaLift
1. Place a standard flat rack in oven.
2. Place level on the rack and check levelness of the range, first
side to side; then front to back.
3. If range is not level, pull range forward until rear leveling leg
is removed from the anti-tip bracket.
4. Follow the directions in Style 1 or Style 2, depending on the
style of drawer supplied with the range.
Style 1: Ranges Equipped with a Storage Drawer:
Use a 1/4" (6.4 mm) drive ratchet, wrench or pliers to adjust
leveling legs up or down until the range is level. Push range
back into position. Check that rear leveling leg is engaged in
the anti-tip bracket.
Style 2: Ranges Equipped with a Warming Drawer or
Premium Storage Drawer:
Use a wrench or pliers to adjust leveling legs up or down
until the range is level. Push range back into position. Check
that rear leveling leg is engaged in the anti-tip bracket.
NOTE: Range must be level for satisfactory baking
performance and best cleaning results using AquaLift
Technology and Steam Clean functions.
Technology or Steam Clean:
®
®
11

Publicité

Table des Matières
loading

Table des Matières