HTW UVC -AC9-1400UVC Manuel D'installation page 10

Rideau d'air cortina de ar
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Installation
1. Remove the fixing screw of the mounting plate, and then remove the mounting plate, as shown
in Figure 1.
2. When installing on the soft wall such as wood board, use ST5 self-tapping nail to fix the
installation board on the wall, as shown in Figure 2.
3. After the installation plate is fixed, hang the air curtain machine on the installation plate, and
then tighten the installation plate and the fixing screw of the air curtain body to ensure firm
installation, as shown in Figure 3.
1
Figure 1
Circuit schematic diagram
RECEIVE
Operation
1. Press the "ON/OFF" button to start the air curtain machine
(at this time, the air curtain works at high speed by default).
2. Press the "Fan speed" button to switch between high speed
and low speed.
3. Press the "UV" button to turn ON/OFF the UV light, and the
UV light will automatically turn off after being turned on for
60 minutes by default. To turn on the UV again, press the "UV"
button again.
Note: Do not look directly at the open UV lamp to avoid
radiation damage; Do not turn on the ULTRAVIOLET lamp
when opening the cover plate.
2
Mounting
plate
Figure 2
ELECTRONIC
BALLAST
RECEIVE
I/O
IC
ST5 self-tapping nail
UV LAMP
THERMAL
THERMAL
CUT-OUT
CUT-OUT
8
3
Figure 3
Ultraviolet (UV)
UV
Fan speed
ON/OFF
Be careful of
UV radiation!

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Uvc htw-ac12-1900uvc uvc htw-ac15-2500uvcUvc htw-ac20-3600uvc

Table des Matières