Switching Off; Adjustment - Hilti POS 15 Guide De Démarrage Rapide

5.6 Further information and operating instructions
Further information and operating instructions can be found online at:
en
POS 15 (http://qr.hilti.com/td/r4847)
POS 18 (http://qr.hilti.com/td/r4849)
5.7 Switching on / off
5.7.1 Switching on
Press and hold the on/off button for approx. 2 seconds.
NOTE
If the tool is starting from a fully switched-off state, the complete start-up procedure takes approx. 20 – 30 seconds,
during which two different screens are displayed consecutively.
If the tool cannot be switched on, check that the batteries have been inserted correctly.
If the batteries have been inserted correctly and the tool still cannot be switched on, have it checked by Hilti Service.

5.7.2 Switching off

Press the on / off button.
NOTE
Please note that when switching off or restarting, the user is asked to confirm this action, just to be sure.
You have three alternatives: 1. You may switch off the tool completely. 2. You may restart the tool. Unsaved data will
then be lost. 3. You may end the Hilti application; the tool remains switched on.

6 Adjustment

6.1 Hilti Repair Service
The Hilti Repair Service checks the tool and, if deviations from the specified accuracy are found, recalibrates it
and checks it again to ensure conformity with specifications. The service certificate provides written confirmation of
conformity with specifications at the time of the test.
Recommendation
Have the tool checked at suitable intervals, depending on how heavily it is used.
Have it checked by the Hilti Repair Service at least once a year.
After exceptionally heavy use or rough treatment, have the tool checked by the Hilti Repair Service.
The tool should be checked by the Hilti Repair Service before being used for particularly important work.
Having the tool checked by the Hilti Repair Service does not relieve the user of his/her obligation to check the tool
before and during use.
22