Toto Neorest WT174M Manuel D'installation Et D'utilisation page 5

Use the lower bracket to lock the outlet pipe to the Carrier.
Place the carrier into the wood frame, make sure the carrier is horizontally leveled
ush is placed in the front face of the stud frame.
Use the screws provided for securing the System. Install the outlet pipe to the
sewer pipe.
H
Plumb the water supply line and
check for leak.
CAUTION
This indicates that misoperation could
result in injury or physical damage.
It is important to reconfirm
that there is no water
leakage at all connections.
Required
Incomplete connection
could cause foul odor or
water to leak.
The symbol indicates something that
must be done.
Insert the mud guard for the inlet and outlet, the push plate
rough-in for the push plate and the two (2) Threaded
Mounting Stud for the mounting bowl on the inner holes.
1
1
1
2
Before connecting the flexible hose
to the fill valve, open shutoff valve
to let water run for a minute or two.
After that, shut off the valve and the
main supply valve.
5
1
2