Cleaning Procedure Guide - Pratica FORZA STi Guide D'installation Et D'utilisation

CLEANING PROCEDURE GUIDE

a) To help in the cleaning of the Forza STi, use the Cleaning Procedure Guide,
accessing it through the Options screen, then clicking on the Options icon
then pressing the button
b) At each step it is possible to watch a video that teaches the user how to perform the
cleaning by pressing the
1
CLEANING PROCEDURE GUIDE
VIDEO
LET'S BEGIN THE CLEANING
PROCEDURE.
OPEN THE DOOR AND WAIT
FOR THE TEMPERATURE TO
GET DOWN TO 149°F;
CURRENT TEMPERATURE:
Open the door and
wait for the
temperature to get
down to 149°F.
Proceed clicking on
the arrow:
4
CLEANING PROCEDURE GUIDE
VIDEO
TO WASH THE CATALYTIC
CONVERTER PLACE IT IN A
CONTAINER WITH WATER
AND SOAP AND LET IT SOAK;
PPES NEEDED:
To wash the catalytic
converter place it in a
container with water
and soap and let it
soak. Proceed clicking
on the arrow:
62
TEC , follow the steps informed on the screen carefully.
TEC icon on the screen.
2
CLEANING PROCEDURE GUIDE
REMOVE THE GRID AND
CATALYTIC CONVERTER AND
PLACE THEM OVER THE SINK
180°F
REMOVE THE CATALYTIC CONVERTER EACH
TIME IT CLEANS THE CAVITY.
Remove the grade
and catalytic
converter and place
them over the sink.
Proceed clicking on
5
CLEANING PROCEDURE GUIDE
APPLY THE OVEN CLEANER TO
THE WALLS OF THE CHAMBER,
INSIDE THE DOOR AND ON THE
CEILING.
START TIMER
PPES NEEDED:
Apply the Oven Cleaner
to the walls of the
chamber, inside the
door and on the ceiling.
At the end of the 5
minutes, the oven will
follow the next step.
VIDEO
the arrow:
VIDEO
TEC , and
3
CLEANING PROCEDURE GUIDE
VIDEO
APPLY OVEN CLEANER TO THE
GRID AND LET IT ACT WHILE
PERFORMING THE NEXT STEPS.
PPES NEEDED:
Apply Oven Cleaner
to the grid and let it
act while performing
the next steps.
Proceed clicking on
the arrow:
6
CLEANING PROCEDURE GUIDE
VIDEO
USE A NON-ABRASIVE SPONGE
PROPERLY FIXED TO THE
CLEANING ACCESSORY TO
REMOVE THE MORE ADHERED
STAINS;
PPES NEEDED:
Use a non-abrasive
sponge properly fixed to
the cleaning fixture to
remove the more
adhered stains. Proceed
clicking on the arrow: