Installation Instructions Electrical Installation - Pratica FORZA STi Guide D'installation Et D'utilisation

INSTALLATION INSTRUCTIONS
ELECTRICAL INSTALLATION
Always follow the installation instructions in the instruction manual or the
Ÿ
product's spec sheet. This form is attached to the manual, in addition to
being sent by email upon approval of the order, it is also available on our
website (www.praticabr.com), in case of questions, contact Prática
Technical Assistance: +55 35 3449-1235 (All world) or 214-584-6269
(Only for United States and Canada).
The installation of the Prática ovens must be done with the necessary care
Ÿ
to avoid problems, damage to the equipment, and guarantee its full use.
This equipment must be installed by an authorized technician.
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Forza Voltage
(V)
STi
208
USA
240
Europe
230
18
The equipment MUST be grounded.
The oven must have a exclusive circuit breaker.
Do not immerse the power cable or connect water to the unit.
Keep the power cord away from heated surfaces.
If the power cable is damaged, it must be immediately
replaced by an authorized technician to avoid shock hazards.
Only qualified personnel should open the equipment panel.
There is an equipotential point on the rear panel of the oven.
Freq. Power
Phases
(Hz) (kW)
Single 60
60
Single
50
Single
Circuit
Breaker
Cable
(A)
5.6 30
3x10
AWG
7.2 30
6.6 32
3x4mm²
Socket
NEMA
6-30
32A
(2P+E)