Cleaning And Maintenance; Environmental Protection - Matrix AKJS 20 X-ONE Manuel D'utilisation

• Have the appliance serviced whenever
necessary.
• Switch the appliance off when it is not in use.
• Wear protective gloves.

10. Cleaning and maintenance

Always remove the battery from machine before
doing any work on the circular saw!
10.1 Cleaning
• Keep all safety devices, air vents and the motor
housing free of dirt and dust as far as possible.
Wipe the equipment with a clean cloth or blow it
with compressed air at low pressure.
• We recommend that you clean the device
immediately each time you have finished using it.
• Clean the equipment regularly with a moist
cloth and some soft soap. Do not use cleaning
agents or solvents; these could attack the plastic
parts of the equipment. Ensure that no water can
seep into the device.
11.2 Maintenance
Please charge the battery pack regularly, for
example, once every 6 months.
11. Repairs
Only use accessories and spare parts
recommended by the manufacturer.
If the equipment should fail some day in spite of
our quality controls and your maintenance, only
have it repaired by an authorized electrician.

12. Environmental protection

End of life electrical equipment must not
be placed in household waste. Please
take it to a return point. Find out about
your nearest return point from your
council or sales outlet.
UK
21