Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
10. Cleaning and maintenance
Always pull out the mains power plug before
starting any cleaning work.
10.1 Cleaning
• Keep all safety devices, air vents and the motor
housing free of dirt and dust as far as possible.
Wipe the equipment with a clean cloth or blow it
with compressed air at low pressure.
• We recommend that you clean the device
• Clean the equipment regularly with a moist
cloth and some soft soap. Do not use cleaning
agents or solvents; these could attack the plastic
parts of the equipment. Ensure that no water can
seep into the device.
10.2 Carbon brushes
In case of excessive sparking, have the carbon
Important! The carbon brushes should not be rep
10.3 Maintenance
There are no parts inside the equipment which
require additional maintenance.
34
11. Repairs
Only use accessories and spare parts
recommended by the manufacturer.
If the equipment should fail some day in spite of
our quality controls and your maintenance, only
have it repaired by an authorized electrician.
If the supply cord of the appliance is damaged,
this has to be done by the manufacturer or his
agent or electrician in order to avoid a safety
hazard.
12. Environmental protection
End of life electrical equipment must not
be placed in household waste. Please
take it to a return point. Find out about
your nearest return point from your
council or sales outlet.
Publicité
Table des Matières
