ECOVACS ROBOTICS WINBOT X Manuel D'instructions page 17

2. Operating WINBOT / 2.3 Stop Cleaning
Stop Cleaning: After WINBOT completes a cleaning cycle, it returns to the starting spot and reports "Cleaning complete."
Remove WINBOT
1
After pausing WINBOT, grasp the handle, press and hold the
about 5 seconds until the fan stops. Detach WINBOT from the window.
Detach Safety Pod
3
Power WINBOT OFF
2
Turn the power switch at the bottom of WINBOT to "O". ("I"= ON,
for
"O"= OFF)
Power Safety Pod OFF
4
2. Operating WINBOT
17
EN