Status Indictor Light - ECOVACS ROBOTICS WINBOT X Manuel D'instructions

4. Status Indictor Light

WINBOT Status
Indicator Start/
Pause Button
WINBOT
Safety Pod Status
Indicator
Safety
Battery Indicator
Pod
WINBOT emits a voice report when being powered ON, completing a cleaning cycle, or coming across a problem.
22
EN
When WINBOT is charging, the indicator flashes BLUE and goes out after being fully
Flashing BLUE
charged.
This is normal. WINBOT automatically enters Sleep Mode after being paused for a while.
BLUE light out
Press the Start/Pause Button to wake up WINBOT.
1. This is normal when WINBOT is working or paused.
Glowing BLUE
2. Safety Pod is in preparation.
Flashing RED Please refer to the Troubleshooting Section for solutions.
Glowing RED WINBOT has a low battery and needs charging.
Glowing GREEN Safety Pod is normal, and WINBOT can start working.
Safety Pod is not prepared to be attached to the glass:
1. Safety Pod signal is not detected.
Flashing RED 2. Safety Pod Connector is not inserted into WINBOT.
3. Safety Pod is not paired with WINBOT.
4. Safety Pod is not attached to the glass safely and firmly.
Glowing RED Safety Pod's batteries are low and need replacing.
Glowing GREEN This is normal. Safety Pod's battery power is sufficient.
Safety Pod's batteries are low. Please replace the batteries as described in Section 3
Glowing RED
Maintenance.