Operating Winbot - ECOVACS ROBOTICS WINBOT X Manuel D'instructions

2. Operating WINBOT / 2.1 Notes Before Cleaning
Remove Protection Strips
1
Before first use, make sure to remove the protection strips.
* Please only use WINBOT on a smooth, firm surface with a frame that
is thicker than 3mm/0.12".

2. Operating WINBOT

Charge
2
Connect the Power Adapter to the WINBOT Charging Port, and then
plug it into a power supply.
* Before first use, make sure to fully charge WINBOT for about
hours.
2.5
11
EN